| Set the view so that the entire model is visible in the drawing pane. |
Zoom Extents |
| Activate the manual zoom tool, where you can specify a portion of the drawing to enlarge. |
Zoom Window |
| Magnify the current view in the drawing pane. |
Zoom In |
| Reduce the current view in the drawing pane. |
Zoom Out |
| Enable the realtime zoom tool, which allows you to zoom in and out by moving the mouse while the left mouse button is depressed. |
Zoom Realtime |
| Open up the Zoom Center dialog box where you can set X and Y coordinates and the percentage of Zoom. |
Zoom Center |
| Enable you to zoom to specific elements in the drawing. You must select the elements to zoom to before you select the tool. |
Zoom Selection |
| Return the zoom level to the most recent previous setting. |
Zoom Previous |
| Reset the zoom level to the setting that was active before a Zoom Previous command was executed. This button also does not appear in the Zoom toolbar by default. |
Zoom Next |
| Activate the Pan tool, which allows you to move the model within the drawing pane. When you select this command, the cursor changes to a hand, indicating that you can click and hold the left mouse button and move the mouse to move the drawing. |
Pan |
| Update the main window view according to the latest information contained in the HAMMER CONNECT datastore. |
Refresh Drawing |
